132991560.qxd 29/07/2003 17:25 Pagina 8 (Nero/Process Black pellicola)
Operating Sequence
Before the first wash, we recommend that you pour 23. Select the required programme
litres of water into the main wash compartment of
Turn the programme selector dial to the programme 1.
the detergent drawer in order to activate the ECO valve.
The light ?start pause? starts to flash. The pilot lights
Then run a cotton cycle at 60°C, without any laundry in
corresponding to the various phases making up the
the machine, to remove any manufacturing residue from
programme come on.
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 6 KG OF WHITE COTTON AT 95°C
Suppose you have 6 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature-
washing.
4. Select ?spin reduction? or
1. Load the laundry
?no spin? option
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,Press the option button repeatedly, to select the desired
shaking them out as much as possible. Close the door.option. The relevant light illuminates.
5. Select the required option
2. Measure out the detergent
and the fabric softenerSelect ?prewash? or ?rinse hold? option if required, the
corresponding light illuminates.
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment and into the
compartment marked if you
have selected the ?prewash? option.
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
?MAX? mark in the drawer). Close the drawer gently.
8 |
ACEC
